FixVault
Home › Saturn › 2007 › Ion Red Line › Repair and Diagnosis › External Pages › Different car › Section 96 (Engine Controls - Introduction) › Repair Instructions › Boost Control Solenoid Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Saturn Ion Red Line. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the boost control solenoid connector.
  2. Remove the boost control solenoid retaining bolt.
  3. Remove the boost control solenoid (2).
    4. Fig 1: Locating ECT Sensor, Boost Control Solenoid, & IAT Sensor
    GM1389396Courtesy of GENERAL MOTORS CORP.
About FixVault