Installation Procedure
- Install the wiper washer switch to the SIR coil module assembly.
- Install the wiper washer switch screws.
- Install the head lamp/turn signal switch to the SIR coil module assembly.
- Install the headlamp/turn signal switch screws.
- Verify the SIR coil is in the center position. Refer to Inflatable Restraint Steering Wheel Module Coil Centering .
- Slide the SIR coil assembly on the steering column and snap into place.
- Connect the wiper/washer harness connector to the SIR coil module assembly.
- Connect the head lamp/turn signal harness connector to the SIR coil module assembly.
- Connect the SIR coil harness connector to the SIR coil module assembly.
- Install the steering column covers. Refer to Steering Column Trim Covers Replacement (Except Redline) or Steering Column Trim Covers Replacement (Redline) .
- Install the steering wheel. Refer to Steering Wheel Replacement .
- Install the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement .
- Enable the SIR system. Refer to SIR Disabling and Enabling .