FixVault
Home › Saturn › 2007 › Ion Red Line › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belt System › Repair Instructions › Child Restraint Tether Anchor Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Child Tether Anchors
    GM876611Courtesy of GENERAL MOTORS CORP.
  1. Position the child tether anchor tab to the alignment hole in the rear shelf.
    2. NOTE: Refer to FASTENER NOTICE .
  2. Install the child tether anchor bolt.

    Tighten:  Tighten the bolt to 25 N.m (18 lb ft).

  3. Install the rear window trim. Refer to Trim Panel Replacement - Rear Window Shelf .
  4. Close the anchor bezel, pressing into place until fully seated.
About FixVault