FixVault
Home › Saturn › 2007 › Ion Red Line › Repair and Diagnosis › Restraints › Restraints Control Systems › Seat Belt System › Repair Instructions › Lower Anchor Assembly Replacement - Rear No. 1 › Installation Procedure

Installation Procedure

    Fig 1: View Of Lower Anchor Assembly
    GM876615Courtesy of GENERAL MOTORS CORP.
  1. Install the anchor assembly into the vehicle.
    2. NOTE: Refer to FASTENER NOTICE .
  2. Install the anchor assembly bolts.

    Tighten:  Tighten the bolts to 50 N.m (37 lb ft).

  3. Install the battery cable fastener to the anchor assembly.
  4. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement (Coupe) or Rear Seat Cushion Replacement (Sedan) .
  5. Install the rear seat backs. Refer to Seat Back Replacement - Rear Split Folding .
About FixVault