FixVault
Home › Saturn › 2007 › Relay 3.9 1 › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Repair Instructions › Cruise Control Switch Replacement › Removal Procedure

Removal Procedure

  1. Remove the steering wheel from the vehicle. Refer to Steering Wheel Replacement .
    2. Fig 1: Identifying Steering Wheel Electrical Harness Retaining Clip And Grounding Screw
    GM1539231Courtesy of GENERAL MOTORS CORP.
  2. Remove the steering wheel electrical harness grounding screw (1).
  3. Release the electrical harness connector retainer clip (2) from the steering wheel trim cover.
    4. Fig 2: Identifying Steering Wheel Components
    GM1539232Courtesy of GENERAL MOTORS CORP.
  4. Remove the steering wheel rear trim cover screws (4).
  5. Remove the cruise control switch screws (2).
  6. Remove the steering wheel trim cover (3).
  7. Remove the cruise control switch (1).
About FixVault