FixVault

Installation Procedure

    Fig 1: View Of Motor
    GM1532028Courtesy of GENERAL MOTORS CORP.
  1. Lubricate the motor drive gear teeth.
  2. IMPORTANT: The glass may need to be moved up or down in order to align the motor pinion teeth to the sector teeth.
  3. Position the power window module motor to the 3 window module retaining tabs. Press into place until fully seated.
  4. Connect the wiring harness connector to the regulator motor connector.
  5. Install the water deflector. Refer to Front Side Door Water Deflector Replacement .
  6. Install the trim panel. Refer to Front Side Door Trim Panel Replacement .