FixVault
Home › Saturn › 2007 › Relay 3.9 1 › Repair and Diagnosis › Body & Frame › Ignition Switch/Steering Lock › Immobilizer System › Repair Instructions › LED Indicator Replacement - Vehicle Security System › Removal Procedure

Removal Procedure

  1. Remove the instrument panel upper trim. Refer to Instrument Panel Upper Trim Panel Replacement .
    2. Fig 1: View Of Security Indicator Lamp
    GM315292Courtesy of GENERAL MOTORS CORP.
  2. Remove the security indicator lamp from the instrument panel upper trim:
    1. Rotate the lamp counterclockwise to approximately 1/4 turn.
    2. Pull the lamp out.
  3. Disconnect the security indicator lamp electrical connector from the security indicator lamp.
About FixVault