FixVault
Home › Saturn › 2007 › Relay 3.9 1 › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - Introduction (2 Of 2) › Repair Instructions › Air Cleaner Outlet Duct Replacement › Removal Procedure

Removal Procedure

    Fig 1: Identifying Engine Harness connector At Mass Air Flow (MAF)/intake Air Temperature (IAT) Sensor
    GM1677915Courtesy of GENERAL MOTORS CORP.
  1. Remove the intake manifold cover, if necessary. Refer to Intake Manifold Cover Replacement .
  2. Disconnect the positive crankcase ventilation (PCV) fresh air tube from the air cleaner outlet duct. Refer to Plastic Collar Quick Connect Fitting Service .
  3. Loosen the air cleaner outlet duct clamp at the mass air flow (MAF)/intake air temperature (IAT) sensor.
  4. Loosen the air cleaner outlet duct clamp at the throttle body.
  5. Remove the air cleaner outlet duct from the air cleaner housing and throttle body.
About FixVault