FixVault
Home › Saturn › 2007 › Relay 3.9 1 › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - Introduction (2 Of 2) › Repair Instructions › Fuel Tank Pressure Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Locating Fuel Tank Pressure Sensor
    GM1480291Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel tank. Refer to Fuel Tank Replacement (Long Wheel Base)  or Fuel Tank Replacement (Short Wheel Base) .
  2. Disconnect the fuel sender wiring harness electrical connector from the fuel tank pressure sensor.
  3. Remove the fuel tank pressure sensor.
About FixVault