FixVault
Home › Saturn › 2007 › Relay 3.9 1 › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - Introduction (2 Of 2) › Repair Instructions › Fuel Tank Replacement (Short Wheel Base) › Assembly Procedure

Assembly Procedure

    Fig 1: Identifying Fuel Tank And Related Components
    GM1544794Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel tank module (3). Refer to Fuel Tank Module Replacement (Long Wheel Base)  or Fuel Tank Module Replacement (Short Wheel Base) .
  2. Install the EVAP pipe assembly.
  3. Install the fuel feed pipe (5).
  4. Install the EVAP canister vent solenoid (2).
  5. Connect the fuel feed pipe quick-connect fitting. Refer to Plastic Collar Quick Connect Fitting Service .
  6. Install the EVAP canister. Refer to Evaporative Emission Canister Replacement (Short Wheel Base)  or Evaporative Emission Canister Replacement (Long Wheel Base) .
About FixVault