High Mount Stop Lamp Replacement

WARNING: This page is about a different car, the 2007 Saturn Outlook. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of High Mount Stop Lamp

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Open the liftgate. Remove the interior liftgate garnish molding. Refer to Liftgate Garnish Molding Replacement (without RPO E61) or Liftgate Garnish Molding Replacement (with RPO E61) . Remove the rear spoiler in order to access the high mounted stop lamp. Refer to Rear Spoiler Replacement .
1	High Mounted Stop Lamp Electrical Connector
2	High Mounted Stop Lamp Bolts (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
3	High Mount Stop Lamp Assembly Procedure: Remove the high mounted stop lamp from the bottom side of the rear spoiler.