FixVault
Home › Saturn › 2007 › Relay 3.9 1 › Repair and Diagnosis › External Pages › Different car › Section 19 (Power Door Lock System And Release Systems) › Diagnostic Information and Procedures › Power Liftgate Inoperative › Component Testing › Liftgate Object Sensor

Liftgate Object Sensor

WARNING: This page is about a different car, the 2007 Saturn Outlook. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the right liftgate tape switch.
  2. Test for 10K ohms of resistance between the signal terminal A and the low reference terminal B.
    • If not within the specified range, replace the right liftgate tape switch.
  3. Disconnect the harness connector at the left liftgate tape switch.
  4. Test for 10K ohms of resistance between the signal terminal A and the low reference terminal B.
    • If resistance is not within the specified range, replace the left liftgate tape switch.
About FixVault