FixVault
Home › Saturn › 2007 › Sky Base, Standard › Repair and Diagnosis › Engine Performance › System › Engine Controls & Fuel - 2.4L - Introduction (2 Of 2) › Repair Instructions › Crankshaft Position Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: CKP Sensor Electrical Connector
    GM1589842Courtesy of GENERAL MOTORS CORP.
  1. Remove the starter. Refer to Starter Motor Replacement .
  2. Disconnect the crankshaft position (CKP) sensor electrical connector (1).
    3. Fig 2: CKP Sensor
    GM1578475Courtesy of GENERAL MOTORS CORP.
  3. Remove the CKP sensor bolt.
  4. Remove the CKP sensor.
About FixVault