Power Seat Switch Replacement

WARNING: This page is about a different car, the 2007 Pontiac Montana SV6, 2007 Chevrolet Uplander, and 2007 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Power Seat Switch

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the front bucket seat. Refer to Front Seat Replacement - Bucket .
1	Screw, Seat Recliner Handle NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
2	Handle, Seat Recliner
3	Plug, Seat Recliner Handle
4	Screw, Seat Outer Adjuster Cover (Qty: 3) Tighten: 2 N.m (18 lb in)
5	Cover, Seat Outer Adjuster
6	Switch, Power Seat Adjuster Tip: Disconnect the electrical connector. Unclip the switch from the seat outer adjuster cover.