FixVault
Home › Saturn › 2007 › Sky Red Line, Standard › Repair and Diagnosis › Engine Performance › System › Engine Controls & Fuel - 2.0L - DTC P0010 To P0304 › DTC P0010 or P0011 › Component Testing

Component Testing

  1. Measure the resistance of each CMP actuator solenoid valve assembly. Resistance should be between 8-15 ohms.
  2. Connect a jumper wire between the CMP actuator solenoid control circuit at the solenoid and a good ground. Connect a fused jumper wire to the CMP actuator solenoid ignition voltage circuit at the solenoid. Momentarily touch the fused jumper to B+. Observe the spool valve inside the CMP actuator. The spool valve should move from fully closed to fully opened position.
About FixVault