FixVault

Circuit/System Testing

WARNING: This page is about a different car, the 2007 Pontiac Solstice. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the inside rearview mirror.
  2. Ignition ON, verify that a test lamp illuminates between the inside rearview mirror lamps supply voltage circuit and ground.
    • If the test lamp does not illuminate, test the supply voltage circuit for a short to ground or an open/high resistance. If the circuits test normal, replace the BCM.
  3. Connect the inside rearview mirror harness connector.
  4. Verify with a scan tool that the DTC does not reset as current.
  5. If the DTC resets, test or replace the inside rearview mirror.