FixVault
Home › Saturn › 2007 › Sky Red Line, Standard › Repair and Diagnosis › Steering › Steering Wheel And Steering Column › Repair Instructions › Turn Signal Multifunction Switch Replacement › Installation Procedure

Installation Procedure

    Fig 1: Headlamp/Turn Signal Switch
    GM1551345Courtesy of GENERAL MOTORS CORP.
  1. Install the multifunction turn signal switch (1). Ensure the locking tabs are snapped into place.
  2. Connect the multifunction turn signal switch harness connector.
  3. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement .
About FixVault