FixVault
Home › Saturn › 2007 › Vue Red Line, AWD › Repair and Diagnosis › Brakes › Traction Control › Antilock Brake System And TCS › Repair Instructions › Brake Pressure Modulator Valve Bracket Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Transmission Control Module
    GM927845Courtesy of GENERAL MOTORS CORP.
  1. Remove the transmission control module (TCM), if equipped, from the mounting bracket and position aside.
    2. Fig 2: Disconnecting/Connecting Electrical Connector From Electronic Brake Control Module (EBCM)
    GM927847Courtesy of GENERAL MOTORS CORP.
  2. Turn the ignition switch to the OFF position.
  3. Disconnect the electronic brake control module (EBCM) electrical connector.
    4. Fig 3: Removing/Installing Brake Modulator Assembly To The Bracket
    GM927841Courtesy of GENERAL MOTORS CORP.
  4. Loosen the 2 insulator nuts on the brake pressure modulator valve (BPMV) assembly.
  5. Carefully lift the brake modulator assembly just enough to clear the bracket, then support the assembly.
    6. Fig 4: View Of BPMV Bracket
    GM890992Courtesy of GENERAL MOTORS CORP.
  6. Remove the brake pressure modulator assembly bracket mounting bolts.
  7. Remove the bracket from the vehicle.
About FixVault