FixVault

Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 1: View Of Front Fog Lamp Switch
    GM1246237Courtesy of GENERAL MOTORS CORP.
  1. Install the switch assembly on to the bezel and install the fasteners.

    Tighten the fasteners to 2.5 N.m (22 lb in).

  2. Install the I/P trim panel bezel. Refer to Trim Bezel Replacement - Center in Instrument Panel, Gages, and Console.