Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Position the radio in the vehicle.
Connect the ground strap.

Fig 1: View Of Ground Strap
Courtesy of GENERAL MOTORS CORP.
Connect the electrical connectors and the antenna.

Fig 2: View Of Radio Electrical Connectors & Antenna
Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Fig 3: View Of Radio & Screws

Courtesy of GENERAL MOTORS CORP.

Install the radio screws.
Tighten the screws to 2.5 N.m (22 lb in).
Install the I/P center trim bezel. Refer to Trim Bezel Replacement - Center in Instrument Panel, Gages, and Console.
Set up the radio. Refer to Radio Setup .