Installation Procedure

WARNING: This page is about a different car, the 2006 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Ground Strap

Courtesy of GENERAL MOTORS CORP.

Position the radio in the vehicle.

Fig 2: View of Radio Electrical Connectors & Antenna

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connectors and the antenna.

Fig 3: View of Radio & Screws

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the radio screws.
Tighten: Tighten the screws to 2.5 N.m (22 lb in).
Install the I/P center trim bezel. Refer to Trim Bezel Replacement - Center in Instrument Panel, Gages, and Console.
Set up the radio. Refer to Radio Setup .