FixVault
Home › Saturn › 2008 › Astra XE, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - Introduction (2 Of 2) › Repair Instructions › Barometric Pressure Sensor Replacement › Installation Procedure

Installation Procedure

    NOTE: Refer to Fastener Notice .
  1. Install the barometric pressure sensor.

    Tighten:  Tighten the bolt to 5 N.m (44 lb in).

  2. Install the wiring harness of the barometric pressure sensor.
    • Install the wiring harness plug.
    • Install the cable ties.
  3. Lower the vehicle.
About FixVault