FixVault
Home › Saturn › 2008 › Astra XE, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - Introduction (2 Of 2) › Repair Instructions › Barometric Pressure Sensor Replacement › Removal Procedure

Removal Procedure

  1. Raise the vehicle.
    2. Fig 1: View Of Wiring Harness Of The Pressure Sensor, Wiring Harness Plug And Cable Ties
    GM1998419Courtesy of GENERAL MOTORS CORP.
  2. Remove the wiring harness of the barometric pressure sensor (1).
    • Remove the wiring harness plug (2).
    • Remove the 1 or 2 cable ties (3).
    3. Fig 2: View Of Barometric Pressure Sensor And Bolt
    GM1998449Courtesy of GENERAL MOTORS CORP.
  3. Remove the barometric pressure sensor (1).

    Remove the bolt (2).

About FixVault