FixVault
Home › Saturn › 2008 › Astra XE, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - Introduction (2 Of 2) › Repair Instructions › Camshaft Position Sensor Replacement › Installation Procedure

Installation Procedure

    NOTE: Refer to Fastener Notice .
  1. Install the camshaft position sensor of the exhaust camshaft.

    Tighten:  Tighten the bolt to 6 N.m (53 lb in).

    • Connect the wiring harness of the oxygen sensor to the bracket.
    • Install the wiring harness plug.
  2. Install the camshaft position sensor, intake camshaft.

    Tighten:  Tighten the bolt to 6 N.m (53 lb in).

    Connect the wiring harness plug.

  3. Close the hood.
About FixVault