FixVault
Home › Saturn › 2008 › Astra XE, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - Introduction (2 Of 2) › Repair Instructions › Crankshaft Position Sensor Replacement › Installation Procedure

Installation Procedure

    NOTE: Refer to Fastener Notice .
  1. Install the crankshaft position sensor.

    Tighten:  Tighten the bolt to 4.5 N.m (40 lb in).

    • Install the wiring harness plug into the bracket.
    • Install the wiring harness plug.
  2. Install the starter. Refer to Starter Motor Replacement .
About FixVault