FixVault
Home › Saturn › 2008 › Astra XE, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - Introduction (2 Of 2) › Repair Instructions › Fuel Pressure Sensor Replacement › Removal Procedure

Removal Procedure

  1. Loosen the nuts on the right rear wheel.
  2. Raise the vehicle halfway.
  3. Remove the right rear wheel.
    4. Fig 1: View Of Wheel Housing Inner Paneling Nuts And Bolts
    GM1937706Courtesy of GENERAL MOTORS CORP.
  4. Remove the right rear wheel housing inner paneling.
    • Remove the 2 nuts (1)
    • Remove the 2 bolts (2)
  5. Remove the pressure sensor (atmospheric pressure) (2)
    1. Disconnect the wiring harness from the pressure sensor (atmospheric pressure) (1)
    2. Remove the cable ties (4)
    3. Disconnect the wiring harness plug
    4. Remove the bolt (3)
About FixVault