FixVault
Home › Saturn › 2008 › Astra XE, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - Introduction (2 Of 2) › Repair Instructions › Throttle Body Assembly Replacement › Installation Procedure

Installation Procedure

    NOTE: Refer to Fastener Notice .
  1. Install the throttle valve assembly.

    Use a NEW gasket.

    Tighten:  Tighten the 4 bolts to 8 N.m (71 lb in).

  2. Install the 2 coolant hoses.

    Install the 2 clamps.

  3. Install the wiring harness plug.
  4. Install the engine venting hose.

    Connect the quick release fitting.

  5. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
About FixVault