FixVault
Home › Saturn › 2008 › Sky Base, Standard › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 2.4L - Introduction (2 Of 2) › Repair Instructions › Air Cleaner Element Replacement › Removal Procedure

Removal Procedure

    Fig 1: Locating MAF/IAT Sensor Electrical Connector
    GM1592530Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the mass air flow (MAF)/intake air temperature (IAT) sensor electrical connector (1).
    2. Fig 2: View Of Air Cleaner Components
    GM1594070Courtesy of GENERAL MOTORS CORP.
  2. Unlatch the upper air cleaner cover retainer clips.
  3. Remove the upper air cleaner cover.
  4. Remove the air cleaner filter from the lower air cleaner housing.
  5. Inspect the air cleaner filter for dust, dirt and water contamination.
  6. Replace as necessary. Refer to Maintenance Schedule (North American Emissions) .
About FixVault