FixVault
Home › Saturn › 2008 › Sky Red Line, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 2.0L - Introduction (2 Of 2) › Repair Instructions › Manifold Absolute Pressure Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: Identifying MAP Sensor & Bolts
    GM1828338Courtesy of GENERAL MOTORS CORP.
  1. Lubricate the O-ring seal with clean engine oil.
  2. Install the MAP sensor to the intake manifold.
    3. NOTE: Refer to Fastener Notice .
  3. Install the MAP sensor bolts.

    Tighten:  Tighten the bolts to 10 N.m (89 lb in).

    4. Fig 2: Identifying MAP Sensor Connector
    GM1825525Courtesy of GENERAL MOTORS CORP.
  4. Connect the engine wiring harness electrical connector (2) to the MAP sensor.
About FixVault