FixVault
Home › Saturn › 2008 › Sky Red Line, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 2.0L - DTC P0010 To DTC P0299 › DTC P0010 or P0011 › Component Testing

Component Testing

  1. Measure the resistance of CMP actuator solenoid valve assembly. Resistance should be between 8-15 ohms.
  2. Connect a jumper wire between the CMP actuator solenoid control circuit at the solenoid and a good ground. Connect a fused jumper wire to the CMP actuator solenoid ignition voltage circuit at the solenoid. Momentarily touch the fused jumper to B+. The spool valve should move from fully closed to fully opened position.
About FixVault