Installation Procedure

Fig 1: View Of Intake Air Pressure & Temperature Sensor & Bolts

Courtesy of GENERAL MOTORS CORP.

Lubricate the intake air pressure and temperature sensor O-ring with clean engine oil.
Install the intake air pressure and temperature sensor.

NOTE: Refer to Fastener Notice .

Install the intake air pressure and temperature sensor bolts.
Tighten: Tighten the bolts to 9 N.m (80 lb in).

Fig 2: Intake Air Pressure & Temperature Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the engine wiring harness electrical connector (2) to the intake air pressure and temperature sensor.