FixVault
Home › Saturn › 2008 › Vue Red Line, AWD › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 3.6L - Introduction (2 Of 2) › Repair Instructions › Engine Coolant Temperature Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of ECT Sensor
    GM1836047Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the ECT sensor.

    Tighten:  Tighten the sensor to 22 N.m (16 lb ft).

    2. Fig 2: Generator Terminal Nut
    GM1888716Courtesy of GENERAL MOTORS CORP.
  2. Connect the engine wiring harness electrical connector (10) to the ECT sensor (3).
About FixVault