FixVault

Removal Procedure

    Fig 1: Identifying Mass Air Flow (MAF)/intake Air Temperature (IAT) Sensor & Connector
    GM1889700Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the engine wiring harness electrical connector (1) from the mass airflow (MAF)/intake air temperature (IAT) sensor.
  2. Loosen the air cleaner outlet duct clamp at the air cleaner assembly.
  3. Remove the air cleaner outlet duct from the air cleaner assembly.
  4. Fig 2: Identifying Air Cleaner Cover, Latches & Air Filter Assembly
    GM1837999Courtesy of GENERAL MOTORS CORP.
  5. Disengage the air cleaner cover latches (1).
  6. Open the air cleaner cover.
  7. Remove and discard the air filter assembly (2).