FixVault
Home › Saturn › 2009 › Aura Green Line › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 2.4L - Introduction › Repair Instructions › Camshaft Position Sensor Replacement - Exhaust › Installation Procedure

Installation Procedure

    Fig 1: View Of CMP Sensor
    GM1578483Courtesy of GENERAL MOTORS CORP.
    NOTE: Inspect the CMP sensor for damage, replace as necessary.
  1. Lubricate the CMP sensor O-ring seal with clean engine oil.
  2. Install the CMP sensor. (Intake CMP shown, exhaust CMP similar).
    3. CAUTION: Refer to Fastener Caution .
  3. Install the CMP sensor bolt and tighten to 10 N.m (89 lb in).
    4. Fig 2: Identifying Engine Wiring Harness Electrical Connectors
    GM1890093Courtesy of GENERAL MOTORS CORP.
  4. Connect engine wiring harness electrical connector (5) to the exhaust CMP sensor (4).
  5. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
About FixVault