FixVault
Home › Saturn › 2009 › Aura Green Line › Repair and Diagnosis › Steering › Power Steering › Power Steering System › Repair Instructions › Power Steering Pump Flow Control Valve Replacement - Off Vehicle › Assembly Procedure

Assembly Procedure

    Fig 1: Identifying Power Steering Pump Flow Control Valve Components
    GM1776816Courtesy of GENERAL MOTORS CORP.
  1. Install the power steering pump flow control valve spring (2) into the power steering pump housing (1).
  2. Install the power steering pump flow control valve (3) into the power steering pump housing (1).
  3. Lubricate the power steering pump flow control valve fitting O-ring seal (4) with power steering fluid.
  4. Install the power steering pump flow control valve fitting O-ring seal (4) onto the power steering pump flow control valve fitting (5).
    5. CAUTION: Refer to Fastener Caution .
  5. Install the power steering pump flow control valve fitting (5) to the power steering pump housing (1).

    Tighten the fitting to 60 N.m (44 lb ft).

About FixVault