FixVault
Home › Saturn › 2009 › Sky Base, Standard › Repair and Diagnosis › Suspension › Wheel Alignment System › Repair Instructions › Front Caster and Camber Adjustment

Front Caster and Camber Adjustment

    Fig 1: Identifying Front Camber & Caster Adjustment Points
    GM1743071Courtesy of GENERAL MOTORS CORP.
    NOTE:
    • Adjust settings in the following order:
      • Camber (1)
      • Caster (2)
      • Toe
    • The camber and caster adjustments can affect each other. Always double check the settings before final fastener tightening.
  1. Loosen the lower control arm cam bolts.
  2. Rotate the cam bolts to the required camber setting. Maintain the camber setting while tightening the cam bolts. Refer to Wheel Alignment Specifications .
  3. Rotate the cam bolts to the required caster setting. Maintain the caster setting while tightening the cam bolt nuts. Refer to Wheel Alignment Specifications .
    4. CAUTION: Refer to Fastener Caution .
  4. Maintain the caster or camber setting while tightening the cam bolt nuts to 165 N.m (122 lb ft).
  5. Check the caster and camber settings after tightening.
  6. Adjust the caster and camber setting if necessary.
  7. Adjust the front toe. Refer to Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment .
About FixVault