FixVault
Home › Saturn › 2009 › Sky Red Line, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 2.0L - Introduction › Repair Instructions › Camshaft Position Sensor Replacement - Exhaust › Removal Procedure

Removal Procedure

    Fig 1: Identifying ECT Sensor Engine Wiring Harness Electrical Connector
    GM1826284Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the engine wiring harness electrical connector (4) from the exhaust camshaft position (CMP) sensor.
    2. Fig 2: View Of CMP Sensor
    GM1578483Courtesy of GENERAL MOTORS CORP.
  2. Remove the CMP sensor bolt. (Intake CMP shown, exhaust CMP similar)
  3. Remove the CMP sensor.
About FixVault