FixVault
Home › Saturn › 2009 › Sky Red Line, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 2.0L - Introduction › Repair Instructions › Camshaft Position Sensor Replacement - Intake › Removal Procedure

Removal Procedure

    Fig 1: Identifying High Pressure Fuel Pump Connector & Clip
    GM1826282Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel feed intermediate pipe. Refer to Fuel Feed Intermediate Pipe Replacement .
  2. Disconnect the engine wiring harness electrical connector (2) from the intake camshaft position (CMP) sensor.
    3. Fig 2: View Of CMP Sensor
    GM1578483Courtesy of GENERAL MOTORS CORP.
  3. Remove the CMP sensor bolt.
  4. Remove the CMP sensor.
About FixVault