Instrument Panel Inflatable Restraint Module Replacement (Solstice)

WARNING: This page is about a different car, the 2010 Saturn Sky and 2010 Pontiac Solstice. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Instrument Panel Inflatable Restraint Module (Solstice)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
WARNING: Refer to SIR Warning . WARNING: Refer to SIR Inflator Module Handling and Storage Warning . Preliminary Procedure: Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling .
1	Inflatable Restraint Instrument Panel (I/P) Module Bolt/Screw (Qty: 2) CAUTION: Refer to Fastener Caution . Procedure Open the I/P storage compartment to access the inflator bolts. If a gap condition exists, DO NOT replace the module. This is an appearance issue only and has no effect on air bag performance. Gently pry the cover up to expose the deformed snap tab. Use a nylon trim tool to deflect the snap to engage the trim edge. Press down on the cover to seat. Tighten: 10 N.m (89 lb in)
2	Inflatable Restraint I/P Module Assembly

Callout

Component Name

WARNING: Refer to SIR Warning .

WARNING: Refer to SIR Inflator Module Handling and Storage Warning .

Preliminary Procedure: Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling .

Inflatable Restraint Instrument Panel (I/P) Module Bolt/Screw (Qty: 2)

CAUTION: Refer to Fastener Caution .

Procedure

Open the I/P storage compartment to access the inflator bolts.
If a gap condition exists, DO NOT replace the module.
This is an appearance issue only and has no effect on air bag performance.
1. Gently pry the cover up to expose the deformed snap tab.
2. Use a nylon trim tool to deflect the snap to engage the trim edge.
3. Press down on the cover to seat.

Tighten: 10 N.m (89 lb in)

Inflatable Restraint I/P Module Assembly