Front Fog Lamp Replacement

WARNING: This page is about a different car, the 2010 Saturn Sky and 2010 Pontiac Solstice. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Fog Lamp Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the 3 wheelhouse liner screws, then remove the 3 push pins and pull rearward on the front liner. Disconnect the fog lamp bulb socket electrical connector.
1	Front Fog Lamp Assembly Screw (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten: 2 N.m (18 lb in)
2	Front Fog Lamp Assembly Tip: Remove the lamp assembly from the fog lamp bracket.
3	Front Fog Lamp Bulb WARNING: Refer to Halogen Bulb Warning . Tip: Turn the bulb socket counterclockwise and remove from the fog lamp assembly.
4	Adjuster Screw Procedure: Remove the screw in order to separate the fog lamp from the fog lamp ring.