Cornering Lamp Replacement

WARNING: This page is about a different car, the 2008 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Cornering & Front Fog Lamp Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove either the LF or RF wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .
1	Front Fog Lamp Wiring Harness Connector Tip: Disconnect the electrical harness connector from the forward lamp harness.
2	Cornering and Front Fog Lamp Assembly Retainers (Qty: 2)
3	Cornering and Front Fog Lamp Assembly Bolts (Qty: 2) Tighten: 6 N.m (53 lb in)
4	Cornering and Front Fog Lamp Assembly Tip: Rotate the rear edge of the cornering lamp inward to release the lamp from the front bumper energy absorber.