FixVault
Home › Saturn › 2009 › Vue Green Line, 2.4 Z › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 2.4L - Introduction › Repair Instructions › Crankshaft Position Sensor Replacement › Removal Procedure

Removal Procedure

  1. Remove the starter motor. Refer to Starter Replacement (LZ4) or Starter Replacement (LE5/LAT) or Starter Replacement (LY7) .
    2. Fig 1: View Of Starter And Engine Electrical Connectors
    GM1809558Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the engine wiring harness electrical connector (1) from the crankshaft position (CKP) sensor.
    3. Fig 2: Identifying CKP Sensor
    GM1578475Courtesy of GENERAL MOTORS CORP.
  3. Remove the CKP sensor bolt.
  4. Remove the CKP sensor.
About FixVault