FixVault

Fan Control Module Replacement (HP5)

Fig 1: Fan Control Module
GM2148062Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Remove fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (LCS)
  2. Remove underhood electrical block. Refer to Underhood Electrical Center or Junction Block Replacement (HP5)
  3. Disconnect electrical connectors from cooling fan control module.
1 Cooling Fan Control Module Bolt
CAUTION: Refer to Fastener Caution .

Tighten:  8 N.m (71 lb in)

2 Cooling Fan Control Module