FixVault
Home › Saturn › 2009 › Vue Red Line, AWD › Repair and Diagnosis › External Pages › Different car › Section 1099 (Configurable Customer Control System) › Diagnostic Information and Procedures › Steering Wheel Controls Inoperative › Component Testing

Component Testing

WARNING: This page is about a different car, the 2008 Saturn Outlook, 2008 GMC Acadia, and 2008 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the right steering wheel control switch.
  2. Test for infinite resistance between the ignition terminal 3 and the signal terminal 6 with the switch in the open position.
    • If less than specified value, replace the switch.
  3. Test for less than 5,400 ohms between the ignition terminal and the signal terminal with the switch closed in each position.
    • If greater than the specified range, replace the switch.
About FixVault