Removal Procedure
WARNING: This page is about a different car, the 2007 Cadillac XLR. However, it is still accessible from the selected car via links, so may be relevant.
- Open the rear compartment.
- Remove the rear compartment lid inner trim panel. Refer to Rear Compartment Lid Inner Panel Trim Replacement .
- Disconnect the electrical connector (1) from the back up lamp assembly wiring harness inside of the rear compartment lid.
- Remove the plastic wing nuts (5) attaching the back up lamp (3) to the rear compartment lid.
- Remove the back up lamp (3) from the rear compartment lid.
- Remove the back up lamp bulb/sockets (4) from the back up lamp. Refer to Backup Lamp Bulb Replacement .