FixVault

Removal Procedure

WARNING: This page is about a different car, the 2007 Cadillac XLR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the closeout/insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
  2. Remove the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement .
  3. Fig 1: View Of Driver Knee Bolster Trim Panel & Screws
    GM1224656Courtesy of GENERAL MOTORS CORP.
  4. Remove the retaining screws from the bottom of the switch pad.
  5. Pull outward to disengage the retaining clip.
  6. Disconnect the electrical connectors.
  7. Fig 2: View Of I/P Dimmer Switch & Screws
    GM1224702Courtesy of GENERAL MOTORS CORP.
  8. Remove the retaining screws from the instrument panel (I/P) dimmer switch.
  9. Remove the I/P dimmer switch.