FixVault
Home › Saturn › 2009 › Vue Red Line, FWD › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 3.6L (Ly7) - Introduction › Repair Instructions › Knock Sensor Replacement - Bank 2 › Installation Procedure

Installation Procedure

    Fig 1: View Of Left Knock Sensor
    GM860802Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  1. Position the knock sensor and tighten the knock sensor bolt. Tighten the bolt to 23 N.m (17 lb ft).
    2. Fig 2: Identifying Engine Wiring Harness Electrical Connector
    GM1836687Courtesy of GENERAL MOTORS CORP.
  2. Connect the engine wiring harness electrical connector (2) to the bank 2 knock sensor.
  3. Lower the vehicle.
About FixVault