FixVault
Home › Saturn › 2009 › Vue Red Line, FWD › Repair and Diagnosis › External Pages › Different car › Section 573 (Lighting System) › Repair Instructions › Brake Pedal Position Sensor Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Cadillac XLR. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Electrical Connector & CPA
    GM1204640Courtesy of GENERAL MOTORS CORP.
  1. Remove the instrument panel (I/P) insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
  2. Disengage but do not remove the connector position assurance (CPA) on the connector.

    Disconnect the electrical connector (2).

    3. Fig 2: Identifying Brake Pedal Position Sensor Screw
    GM1204637Courtesy of GENERAL MOTORS CORP.
  3. Remove the screw and discard.
  4. Remove the brake pedal position sensor and discard.
About FixVault