Installation Procedure

WARNING: This page is about a different car, the 2007 Cadillac XLR. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Fog Lamp Bulb/Socket

Courtesy of GENERAL MOTORS CORP.

Install the bulb/socket (1) to the fog lamp.

Fig 2: Seating Fog Lamp Bulb/Socket

Courtesy of GENERAL MOTORS CORP.

Rotate the bulb/socket clockwise (1) until the bulb/socket is fully seated.
Connect the front fog lamp electrical connector to the fog lamp bulb/socket.
Inspect the fog lamp for proper operation.
Install the front fascia lower close out panel. Refer to Front Bumper Fascia Lower Close Out Panel Replacement .
Aim the fog lamp. Refer to Fog Lamp Aiming .