FixVault
Home › Saturn › 2009 › Vue XE, 3.5 N › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 3.5L - Introduction › Repair Instructions › Manifold Absolute Pressure Sensor Replacement › Removal Procedure

Removal Procedure

  1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
    2. Fig 1: View Of MAP Sensor Electrical Connector
    GM1608869Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the manifold absolute pressure (MAP) sensor electrical connector (1).
  3. Remove the spark plug wire clip from the intake manifold bracket.
    4. Fig 2: View Of MAP Sensor Seal & Upper Intake Manifold
    GM1608814Courtesy of GENERAL MOTORS CORP.
  4. Remove the upper intake manifold bolts.
  5. Remove the MAP sensor and bracket.
  6. Remove the MAP sensor seal from the upper intake manifold.
About FixVault